OpenScape 4000 SLMU — 24-port UP0/E Subscriber Line Card
24-port UP0/E card for OpenScape 4000 digital subscriber lines — successor to the SLMO and SLMOP boards. 2B+D ISDN Basic Rate interface, up to 1000 m cable length (ICCS).
Specifications
- Tip / Type
- Subscriber Line Module Universal (UP0/E)
- Order number / Part
- S30810-Q2344-X100
- Port sayısı / Ports
- 24 × UP0/E (2B+D ISDN BRI)
- Maks. kablo uzunluğu / Max cable length
- 1000 m (ICCS uyumlu)
- Yerini aldığı / Replaces
- SLMO (Q2168-X), SLMOP
- Minimum sistem SW / Min system SW
- OpenScape 4000 V7 R2.x.x
- Geriye uyumlu / Backward compatible
- Hayır
- OSA SLO varyantı / OSA SLO variant
- S30807-U6648-X111
- Güç / Power
- -48 V + 5 V (shelf'ten)
- Backplane arayüzleri / Backplane interfaces
- PCM + HDLC
- LED
- RUN (yeşil) + FAIL (kırmızı)
Key features
- Order number: S30810-Q2344-X100.
- 24 UP0/E ports — each a 2B+D ISDN Basic Rate (CorNet-TS) interface.
- Successor to SLMO (Q2168-X) and SLMOP — requires system SW V7 R2+.
- Not backward compatible with older system SW versions.
- Maximum cable length 1000 m (ICCS-compliant) — depending on the cable type used.
- OSA SLO (SLMU) variant — same function in OpenScape Access SLO form factor (S30807-U6648-X111).
- Power: -48 V + 5 V from the shelf's external PSU (most chips are 3.3 V; only backplane drivers differ).
- RUN (green) + FAIL (red) LEDs report the board status.
- PCM + HDLC (High Level Data Link Control) backplane interfaces.
- Coexists with OS 4000 SoftGate/Branch on the same system.
Typical applications
Hotel room phones — 24 UP0/E per shelf for 24 rooms; ICCS-compliant cabling for 1000 m reach.
Hospital ward — digital exam-room phones in non-IP buildings.
Bank branch — migration of legacy Optipoint/OptiSet infrastructure to the V11 platform.
Manufacturing site — line infrastructure for noise-resistant digital phones in the field.
Legacy SLMO refresh — prerequisite for V7 R2+ platform upgrade.
Related Solutions
Related Products
120-channel common gateway board for OpenScape 4000 — successor to STMIX and STMI4 (with PDMX module). High line density, modern USB service ports and LTU shelf integration.
Details
Control interface between OpenScape 4000's central and peripheral parts — successor to the legacy LTUCA board with a new HW ID and part number. Two High-Speed Connect (HSC) interfaces.
Details
Digital interface board terminating external trunk connections on OpenScape 4000 — V11-era successor to DIUT2. Single PCB supports two loadware variants: E1 (ISDN PRI / CAS) and T1 (BOS / MOS / CVN).
Details
Enterprise-grade PBX server for government, hospital, airport and large-campus deployments — Linux-based (SLES), 12,000 subscribers per single system, up to 100,000 when networked, with geo-redundant Hot-Standby Duplex.
Details
OpenScape 4000 sub-system for small to mid-size branches — operates as a fully functional local PBX when the WAN link to the central system fails. Optional AC/AC or AC/DC redundant power supply.
Details24-port UP0/E card for OpenScape 4000 digital subscriber lines — successor to the SLMO and SLMOP boards. 2B+D ISDN Basic Rate interface, up to 1000 m cable length (ICCS).